|Name:||Mini Loaf Pan||Function:||Baking Bread|
|Feature:||Non-stick||Product Material:||1.5mm Aluminum Alloy|
|Usage:||Bakery Bread Tray||Size:||Customer's Requst|
|Material:||Stainless Steel, Aluminum,||Color:||Silver|
aluminium bread pan,
aluminum meatloaf pan
Pullman loaf pans (aka Pullman bread pans) make a perfectly rectangular loaf of bread that is consistent in width and height for its entire length, so that when sliced it yields consistently-sized, perfectly square slices of bread for sandwiches.
It does this thanks to a cover that slides onto the bread pan, helping to mould what would be a rounded top into a perfectly flat one.
They are usually made of aluminized steel.
They need to be seasoned first before using. You not only have to worry about bread sticking to the sides and bottom of the pan, as you would with another loaf pan, but also to the lid as well, which would mean if it did you’d rip the top of your loaf off trying to get the lid off. To season them, pros advise to brush them very well with melted lard or shortening, making sure to get every last seem in the loaf pan and cover. Then, bake empty in a 120 C (250 F) oven until the fat has dried. Remove, let cool, wipe with a soft rag. Repeat a few times.
The pans come in various sizes depending on what a manufacturer decides to offer.
Small: 9 x 4 x 4 inches (23 x 10 x 10 cm). Makes a 1.5 pound / 680g loaf (a bread recipe calling for approximately 3 cups / 15 oz / 425g of flour)
Typical: 13 x 4 x 4 inches (33 x 10 x 10 cm). Makes a 2 pound / 900g loaf (a bread recipe calling for approximately 3 3/4 to 4 cups / 20 oz / 550g of flour. You might be able to fit a 5 cup flour bread recipe in here.)
Long (16 x 4 x 4 inches / 40 x 10 x 10 cm)
Long and skinny: (16 x 3 1/2 x 3 1/2 inches / 40 x 9 x 9 cm)
Don’t fill the pan more than 40% with dough.,As the bread dough rises, it will double in size to almost fill the pan. When it has risen to being just under an inch (2.5 cm) from the top of the pan, grease the bottom of the lid, and slide it on the pan. Don’t let the dough rise much more than that, as you have to allow some room for oven-spring so that you don’t end up with bread dough oozing out the cracks at the top of the pan.
Put in heated 175 C (350 F) oven to bake, or higher, depending on the type of bread you are making.
Some people advise to rotate the pan as follows during baking: after 30 minutes of baking, turn the bread pan on one side for 5 minutes, then on the other side for another 5 minutes, then turn upright. Others say they don’t do this and don’t encounter any issues.
When done, do not leave bread in pan. Turn out of pan onto wire rack to cool.
Q1: What’s JF stainless steel co.,ltd ?
JF stainless steel co.,ltd is a catering company mainly in trolleys, worktables, pots, storage racks, buffet items cake ring , and baking tray over 10 years.
Q2: Why choose JF stainless steel co.’ltd ?
Our faith is customer first +quality first + affordable price, over 10 years wealth experience in making stainless equipment field and exporting.
Q3: What is JF stainless steel service?
You send me email or inquiry – answer all question and send detail quotation list – order confirmation – payment – mass production – inspection report – balance payment – booking – loading- Custom Clearance – on board – send you original document – shipment- goods arrival
Q4: How do JF stainless steel control products quality?
Well trained QC team control quality in every process of production and your salesmen would stand in your point to do the final inspection, detail quality report would send you before loading.
Q5: What’s JF stainless steel MOQ?
JF stainless steel normal products no need MOQ and customize products depend on.
Q6: Can you OEM?
Of course, always welcome.
Q7: Can I get sample for checking quality before order? Should I need to pay?
Many items could provide FREE sample but need to charge the freight. And some items need to charge sample fee+ freight but could refund the sample fee when you place order. Customize sample need to charge sample cost+ freight, no refund.
Q8: What’s the lead time?
About 25-30days after receive the deposit.
Sample delivery time is within 5 days for normal products.
Q9: How can I pay?
Sample small amount could pay via western union, paypal.
Q10: Can I send you our own design?
Of course, if you could send drawing, we could quote you within 3 days. If just let me know some photos or idea, our experienced engineer could make drawing for you.
Contact Person: Jack Wang